Our product, the iSMA-B-FCU-HH fully programmable BACnet controller has been tested to the highest standards at the BACnet Laboratory Labs (BTL) and has been certified to the BACnet standard ISO 16484-5 protocol revision 1.14.
This basically means that we offer a superior product, confirmed and tested by the experts.
Commissioning and Applications
Built to control FCU’s, the iSMA-B-FCU-HH minimises and simplifies commissioning times and supports most types of Fan Coil Units. Dedicated DIP-switches allow parameters to be adjusted and the BACnet protocol has a built-in function which allows the automatic binding of Master and Slave controllers.
It is also possible to modify or create an application from scratch which allows a diverse range of requirements to be met.
Specifications for the BTL approved BACnet Controller
Inputs
- 4x Special Input – voltage, resistance, dry contact
- 4x Digital Input – dry contact
Outputs
- 3x Digital Output 6 A (Fan Speed)
- 1x Digital Output 10 A (electric heater)
- 1x Digital Output 6 A (cooling actuator)
- 2x Triac 0,5 A @ 230 V AC (heating and cooling, actuators)
- 3x Analog Outputs 0-10 V DC (heating, cooling actuators and Fan Speed)
Platform
- ARM Cortex-M4
Power supply
- 230 V AC
Communication
- Interface RS485 half duplex
- Up to 128 devices on the bus
- Protocols: Modbus or BACnet
- Baud rate: 4800 to 115200 bps
Housing
- Dimension: 123,6×136,6×54,5 mm, (123,6×171,2×54,9 mm) with plastic cover for terminals
- Construction: plastic, self-extinguishing (PC/ABS)
- DIN rail mounting DIN (DIN EN 50022 norm)
- Cooling: internal air circulation
Environments
- Operating temperature: -10°C to 50°C
- Storage temperature: -40°C to 85°C
- Relative humidity: 5 to 95%, no condensation
- Ingress Protection Rating: IP40 – for indoor installation
To find out more about the iSMA-B-FCU-HH fully programmable controller with BTL certification, contact ACS today.
